SHIPS TODAY 
50A, 5.0V OEM Laser Diode Driver -10nsec to CW:
The Model 787 OEM laser diode driver is a highly efficient, current regulated, low ripple tri-phase laser diode driver designed to power pulsed and CW high current laser diode stacks.
Features include:
- Output current up to 1.2 Amps
- Output pulse width – 10nsec to CW
- Compliance voltage to 3.0V
- Fast rise time of 6nsec
- 5VDC input power
- RoHS Compliant
Proprietary technology allows a 50A, 5.0V driver with industry-leading efficiency and footprint. Multiple drivers can be stacked together to achieve output currents of 200A or higher. The driver includes open circuit, short circuit, over-temperature and under voltage lockout protection. See our new Lasers 101 page for in depth information on Laser Diodes.
Additional OEM Boards:
OEM Seed Laser Diode Driver:
The Model 763 OEM seed laser diode driver is ideal for driving 14-pin butterfly 
packaged laser diode modules for use in CW or pulsed fiber MOPA systems. Applications include materials processing, LIDAR systems for remote sensing, fiber optic temperature sensing, laser communication and rangefinding.
Features include:
- Output current up to 1.2 Amps
- Output pulse width – 10nsec to CW
- Compliance voltage to 3.0V
- Fast rise time of 6nsec
- 5VDC input power
- RoHS Compliant
OEM Short Pulse Seed Laser Diode Driver:
The Model 766 short pulse seed laser diode driver is ideal for driving 14-pin butterfly package
d laser diode modules for applications which require pulse widths less than 1ns. Applications include materials processing, time-resolved spectroscopy, LIDAR, and others.
- Adjustable Pulsewidths <250ps TO 1ns
- Output Current up to 1.1A
- Compliance voltage to 3.0V
- Repetition Rate up to 1MHz
- On-board TEC controller
- 5VDC input power
- Compact size – Only 2.9” x 3.0” x 0.5”
The driver circuitry operates from a single 5V power source. All other needed voltages are generated on the board by high-efficiency switching
power supplies. The driver supplies a bidirectional proportional-integral-derivative (PID) thermoelectric cooler controller (TEC) with current capability of 3A and voltage capability of 4.2V.
OEM Pockels Cell Driver
The Model 8261C Pockels Cell is designed for continuous pulsed applications.
Features include:
- Adjustable push-pull output to 3.2kV
- 30nsec typical rise times
- Rugged solid-state design
- Self-contained high voltage power supply
- Compact surface mount construction
200A OEM Pulsed Laser Diode Driver
The PLDD-200-12-20-2X2 is an ultra-compact and lightweight version of our standard 200 amp
pulsed current source designed to drive laser diode bars, arrays of laser diode bars, or any low impedance load. The unit features a high peak
current of 200 amps with a rise-time of <10 μs (load dependent) and a maximum pulse width of 300 μs. The pulse repetition frequency can be varied from single shot to 20 PPS.
Features include:
- Output Current up to 200 amps
- Up to 300 μs pulse width
- Rise-time of <10 μs
- Single-shot to 20 PPS
- Current monitor output 1 volt/100 amps
- Optimized for driving up to 12 bar stacks
- Only 2.9 oz.
Ultra-miniature, battery operated, laser diode driver
The PLDD-120-9-1 is an ultra-miniature, battery operated, laser diode driver for driving a nine b
ar laser diode stack to 120 amps of peak current. Due to the compact size and weight (only 24 grams check current weight), this unit is well suited for
man-portable and airborne applications.
Features include:
- Output Current up to 120 amps
- Up to 300 μs pulse width
- Rise-time of <10 μs
- 1 PPS
- Current monitor output 1 volt/100 amps
- Optimized for driving a nine bar stack of diodes
- Only 24 grams
RPMC Lasers strives to provide laser diodes at an affordable price while also providing top-notch customer service. Therefore, we believe we are the best option for ALL your DPSS and Laser Diode needs!
Contact RPMC Lasers by Phone: 636-272-7227 or Email: info@rpmclasers.com