Femtosecond Lasers – fs Fiber Lasers – fs Capable Laser Amplifiers

Learn More About Femtosecond Lasers

A femtosecond (fs) is one quadrillionth of a second or 10⁻¹⁵ seconds.  Femtosecond pulses are often generated through a process known as mode-locking. Mode-locked lasers utilize phase locking to interfere a large number of lasing modes together in such a way as to cause the generation of ultrafast pulses.

As a result of having such short pulse widths, femtosecond lasers have incredibly high peak powers typically in the MW to GW range. At a given pulse energy, the peak power of the laser increases as the pulse width gets shorter. Therefore, femtosecond lasers have much higher peak power than longer pulsed picosecond, nanosecond, or millisecond pulsed lasers.  These higher peak powers can lead to an increase in removal rates in material processing applications, and increased brightness and absorption in microscopy applications.

Femtosecond Laser Application Benefits

In material processing applications, femtosecond laser pulses provide high peak powers, often several MW, creating a breakdown between the electrons and atoms in the material. This breakdown, known as a “Coulomb explosion,” is a cold processing alternative to the conventional thermal ablation utilized by longer pulsed lasers. Ablation is a thermal process that relies on local heating, melting, and vaporization of molecules and atoms. Ablation can be detrimental for some laser applications as it typically creates unwanted HAZ (heat affected zone), recast, burrs and splatter, all of which are negative effects of heat, making femtosecond lasers a better option for applications requiring precise, high-quality results. This cold ablation affect also reduces the need for post processing of the material. Femtosecond lasers can be utilized for non-thermal or cold ablation of any material, including metals, ceramics, polymers, composites, coatings, glass, plastics, diamonds, and PET. Ultrafast lasers can even operate on layered substrates.

In recent years, femtosecond fiber-based lasers have started to replace older, bulkier Ti:Sapphire lasers in the neuroscience fields, specifically multi-photon microscopy. The maintenance, operational, and total cost of ownership of fiber-based femtosecond lasers are much lower when compared to the Ti:sapphire lasers. In addition, the compactness, air-cooling, reduced complexity, and overall increase in performance of femtosecond fiber lasers make them a superior solution for many laboratory requirements.

Our Femtosecond Laser Products

RPMC lasers offers a wide range of high-quality femtosecond pulsed lasers designed with repetition rates ranging from single-shot up to 80 MHz, ultrashort pulse durations down to 100 femtoseconds, and various pulse energy specifications, depending on the configuration.

Our standard femtosecond lasers are available at 1030 nm, and 1064 nm wavelengths, with other wavelength options provided through harmonic generation or through use of an OPA, and average powers up to 150 W available. We currently supply pulsed diode-pumped solid-state (DPSS) lasers and DPSS amplifiers in our femtosecond laser category.

Our Femtosecond Laser Experience

RPMC is your Femtosecond Laser Supplier! We have supplied many fiber based and DPSS femtosecond laser systems to various researchers, laboratories, and materials science development teams around the country. Often, the researchers we work with don’t have extensive laser experience and rely on us to help them choose the best laser for their application or project.

Deeper Dive into Femtosecond Lasers

Femtosecond Laser Applications

The high peak power, high energy pulses, and short pulse widths of femtosecond lasers are ideal for a wide range of applications especially for multi-photon microscopy, non-linear spectroscopy, second harmonic generation (SHG), and micromachining.

Femtosecond lasers microstructure (groove, cut, drill, micromill, etc.) virtually any material with:

• no thermal side-effects such as microcracks, burrs, or recast
• lateral features as small as a few um
• pulses-on-demand for easy integration into delivery systems
• high average power, pulse energy and rep rate for increased ablation rate per pulse

Examples for industrial femtosecond laser micromachining can include:

• IMD – medical and biomedical devices (PMMA, PLLA, catheters, stents, pacemakers, guidewires, cutting, drilling, de-coating, etc.)
• FPD- flat panel display (AMOLED, OLED, Quantum Dots panels)
• Micro and nano-processing of complex materials (glass, ceramics, quartz, sapphire, organic tissues, etc.)
• Surface texturing

Higher Power fs Fiber Lasers to Image Better, Deeper & Faster

How Laser Parameters Define Optimal Results in Multiphoton Excitation Fluorescence

Two-Photon Microscopy: Technique of Choice for In-Vivo High-Resolution Imaging

Two-photon microscopy has become a key fluorescent imaging technique that enables in-vivo, non-invasive 3-dimensional imaging with sub-micron resolution in volume. Challenged by the wider variety of applications particularly in the field of neuroscience, two-photon microscopy has led to the conception of systems using new excitation techniques and innovative laser sources.

Why femtosecond lasers?

Multiphoton excitation needs high peak power and femtosecond lasers have emerged as the optimal solution due to their relatively low fluence limiting damages to living samples. Wavelength tunable Ti:Sapphire lasers met this requirement and have been extensively employed in Biophotonics. This led to standard methods using a conventional pulse regime with typically 100-150 fs pulse duration, 80 MHz repetition rate and watt level average power with specific wavelengths such as 800 nm, 920 nm and 1040-1080 nm.

A variety of pulse characteristics with novel femtosecond lasers

Recent technological developments led to the commercial availability of new generations of femtosecond lasers capable of offering a wider variety of pulse regimes. Femtosecond lasers based on Optical Parametric Chirped-Pulse Amplifications (OPCPA) offer the widest range of pulse regimes, capable of operating at low and selectable repetition rates, in the µJ level and covering a wide wavelength range from near infrared to infrared wavelengths. Although OPCPA based systems offer high versatility, they are bulky, expensive, not as reliable and stable as conventional lasers.

Alternatively fixed wavelength femtosecond lasers have proved to offer a good compromise for 2-photon excitation microscopy. Their main advantages reside in its low price, very compact and robust format, high electrical efficiency and high reliability. This novel generation of lasers available at 780 nm, 920 nm and in the 1030-1070 nm wavelength range were initially conceived to match standard pulse regimes of Ti:Sapphire lasers to replace or complete this solution. Fixed wavelength femtosecond lasers are now offering alternative pulse regimes not accessible by Ti:Sapphire lasers such as various repetition rates, higher average power and higher energy making them ideal candidates to push boundaries of today’s research. Nevertheless, with such a wide variety of femtosecond lasers, choosing an adequate laser solution suitable for a given application is becoming challenging.

Laser parameters for multiphoton excitation

In the following, we review how laser pulse characteristics affect multiphoton excitation processes.

Multiphoton excitation microscopy relies on nonlinear optical processes produced in living samples, generating localized fluorescence which will be selectively detected to produce an image. Optical nonlinearities are directly related to laser pulse properties as high light intensity is required to enhance nonlinear effects in samples, here biological materials.

High intensity is achieved by focusing a laser beam to spot size in the µm range. The challenge is to obtain multiphoton excitation fluorescence deep into a sample where water absorption and scattering are significant. While it is well known that the capacity to focus is given by low aberration, high numerical aperture microscope objectives combined with adequate laser beam dimensions, the choice of excitation wavelength is also important as shorter wavelength would result in higher scattering loss. Water absorption must also be considered to image deeper into a biological sample. Assuming that all spatial and spectral characteristics of a laser beam are maintained and optimized, one need to consider actual pulse regime to maximize multiphoton excitation efficiency.

Pulse parameters for multiphoton excitation

Once nonlinear fluorescence is produced by a tightly focused laser beam, laser pulse parameters must be optimized for further enhancement. Considering only pulse characteristics, multiphoton excitation fluorescence   directly depends on average power  and peak power  :

Basically, fluorescence is proportional to average power for a given peak power. Peak power is related to pulse duration  and pulse energy  by:

This means that, for a given pulse energy, shorter pulse duration would increase peak power. This explains why femtosecond are commonly employed in multiphoton processes.

Nonlinear fluorescence can now be expressed as a function of Energy and pulse duration:

This expression shows that choosing the shortest pulse duration would improve fluorescence as fluorescence evolves proportionally to .

Group delay dispersion compensation

Some commercial lasers can produce pulses of <10 fs which in theory would increase fluorescence  by a factor of >10 compared to a conventional 100 fs pulse duration. In reality, this theory is limited by dispersion induced by all the optics composing the microscopy system. For pulse durations of more than 70 fs, group delay dispersion (GDD) of optical elements can be precompensated by conventional dispersive elements such as prisms often incorporated in advanced laser sources. This ensures pulse quality is maintained on the sample. However, for pulses with durations of <70 ps, higher order dispersion dominates, severely degrading pulse duration. Consequently, a laser producing <10 fs pulse duration would actually produce much lower fluorescence compared to a laser producing 100 fs pulse duration. This is why femtosecond lasers employed in multiphoton excitation are typically characterized by pulse durations in the range of 80 to 150 fs where GDD precompensation can be the most effective.

More average power is better

We saw peak power as a crucial factor to define the fluorescence factor . Energy is also defined by repetition rate   and average power :

Leading to the following definition of fluorescence factor :

This relation demonstrates that for a laser with given repetition rate and pulse duration, fluorescence increases quadratically as a function of average power. Previously, we also found out that optimal pulse duration must be larger than 70 fs to avoid higher dispersion and shorter than 150 fs to keep high peak power. With limited possibilities to optimize pulse duration, average power becomes the most significant parameter to increase nonlinear fluorescence.

Limitations of laser power scaling in in-vivo bio-imaging

While the theory shows that more power generates higher multiphoton excitation fluorescence, this can also create photobleaching or potentially damage living samples. This greatly limits the use of higher average power in in-vivo microscopy systems. If too much optical power can damage a single spot, then it offers the possibility to excite multiple sites with well-defined power levels on each site. This strategy is used today by several laboratories, pushing the need for femtosecond lasers producing higher and higher average power.

How changing repetition rate can help

Since high average power may damage biological living samples, one may increase fluorescence efficiency while keeping average power to a reasonable level, by decreasing repetition rate. This possibility is offered by new fixed wavelength lasers as well as OPCPA based lasers. Decreasing repetition rate presents various benefits in multiphoton microscopy but also in optogenetics where higher pulse energy is required to excite a wider population of neurons while operating below damage threshold of living cells.

How Can We Help?

If you have any questions, or if you would like some assistance please Contact Us here. Furthermore, you can email us at info@rpmclasers.com to talk to a knowledgeable Product Manager.

Alternatively, use the filters on this page to assist in narrowing down the selection of Femtosecond lasers for sale. Finally, head to our Knowledge Center with our Lasers 101 page and Blogs, Whitepapers, and FAQ pages for further, in-depth reading.

Check out our Online Store: This page contains In-Stock products and an ever-changing assortment of various types of new lasers at marked-down/discount prices.