3 Nanosecond Lasers

On this page, we have a list of all of the 3 Nanosecond (ns) pulse width lasers offered by RPMC. If you don’t see a laser with the parameters needed, most of our lasers can be modified for your needs.

Three different parameters determine the output power of a pulsed laser; the laser’s pulse width, the pulse energy, and the pulse repetition rate.

See all of our Nanosecond Lasers.

If you need help selecting the best laser for your application, or defining the laser requirements for a specific application, please contact our product manager for assistance.

Filters Reset

Type

Wavelength Selection

Power Selection

Energy Selection

Pulse Width Selection

Rep Rate Selection

Series

Picture Part Number Type Wavelength (nm) Output power (W) Pulse energy (uJ) Pulse width Rep rate Q-switch type
Placeholder C-Wedge HB 3um Pulsed DPSS Lasers 3000 50.0 3ns Single shot to 1kHz Active
R0Z2-Image-Compact-Efficient-UV-Laser CEUV Pulsed DPSS Lasers 266, 355, 532, 1064 5.0, 10.0, 20.0 3ns 10kHz to 1MHz Active

Wedge Series

metal pulsed laser housing, gray metal, cooling fins, output port

The Wedge series of DPSS lasers is a rugged industrial solution, designed for seamless integration into OEM micromachining, LIDAR, and LIBS end-user systems. Based on proprietary fast Q-switching technology, this series is compact, sealed, and monolithic, making them insensitive to vibrations & harsh environments. High peak powers, relatively low energy, and low heat generation allow efficient ablation and non-linear interaction. Available from 266 nm to ≈ 3 µm, up to 4 mJ pulse energy @ 1064, and up to 4 MW peak power, the lightweight, air-cooled package benefits LIDAR and aerospace applications, while short pulses provide exact time-of-flight measurements. Many optional add-ons and customization options.

CEUV Series

R0Z2-Image-Compact-Efficient-UV-LaserThe CEUV series is a commercial line of compact and efficient DPSS laser sources, capable of operating over a wide range of pulsing conditions (duty-cycle and PRF), in a low SWaP package, with average power up to ≈5W @ 266nm, 10W @ 355nm or 532nm, 20W @ 1064nm. This series of DPSS lasers provides a combination of compact, efficient, and high-power performance in a rugged design suitable for harsh environments and airborne applications. The design has been tested in brassboard hardware and a prototype is being developed.