A picosecond laser is a type of laser that emits pulses of light with a duration of one picosecond (10^-12 seconds).
These extremely short pulses of light allow for high precision and minimal heat-affected zone, making them ideal for a wide range of applications, such as material processing, medical treatments, and scientific research.
Picosecond lasers are one of the most diverse categories of pulsed lasers available on the market today since picosecond pulses can be generated by q-switching, gain switching, and mode locking. Picosecond pulses can be produced from diode-pumped solid-state (DPSS) lasers, fiber lasers, and microchip lasers allowing for an extensive wavelength range from the ultraviolet through the infrared region.
Additionally, this broad range of lasers enables pulse energies in the nJ, µJ, and mJ levels with pulse repetition rates varying from Hz to MHz. The high peak power and short pulse widths (pulse duration) of these lasers are ideal for a wide range of applications especially for material processing and micromachining industrial applications such as laser texturing, trimming, and drilling.
Picosecond Laser Benefits
High precision: The extremely short duration of picosecond laser pulses allows for precise targeting of material and fine features while minimizing damage to surrounding areas.
Minimal heat affected zone: Picosecond lasers generate less heat than longer pulse lasers, which reduces the amount of material affected by the laser and minimizes the risk of thermal damage.
High ablation rate: Picosecond lasers can remove material at a faster rate than longer pulse lasers, making them suitable for high-speed machining and cutting applications.
Improved surface finish: Picosecond lasers can produce a smoother surface finish than longer pulse lasers, which is beneficial for certain applications such as medical devices or electronic components.
Versatility: Picosecond lasers have a wide range of applications, including material processing, medical treatments, scientific research, and more.
Wide range of materials: Picosecond lasers can be used with a wide range of materials, including metals, plastics, ceramics, and semiconductors.
Our Picosecond Products
RPMC offers ps pulsed lasers at various levels of integration from OEM to turn-key, benchtop, laboratory and research laser systems. We group our picosecond lasers into a few different types including Pulsed DPSS Lasers, Pulsed Fiber Lasers, Ultrafast Lasers, Microchip Lasers, and DPSS Amplifiers.
Our lasers are available with ultraviolet (UV), Green, near-infrared (NIR), and short-wave infrared (SWIR) wavelength options, including 266 nm, 355 nm, 532 nm, 1030 nm, 1064 nm, 1100 nm, and 1540 nm. Average output powers for these picosecond laser options range from a few mW (milliwatts) up to 150 W (watts), and pulse energy options ranging from 25 nJ (nanojoules) up to 150 mJ (millijoules).
On this page, you will find picosecond pulse duration options from 750 ps down to 2 ps, as well as nanosecond (ns) and femtosecond (fs) pulse width options. A wide range of repetition rate options are available from single shot up to 80 MHz.
Our Picosecond Laser Experience
RPMC Lasers is your preferred Picosecond Laser Supplier, partnering with industry-leading and emerging manufacturers. We have been in business for over 25 years, providing researchers and OEM integrators with the best laser solution for their application. We have fielded 1000s of units for many different applications from micromachining to LIDAR and Bathymetry to medical applications such as tattoo removal and ablation-based surgical procedures.
Deeper Dive into Picosecond Lasers
Peak Power and Average Power in ns and Sub-ns Lasers:
The extremely high peak power levels achievable by pulsed laser sources are among the main reason for their success in many of the applications which have emerged in the last decades. Therefore, a precise estimation of the laser peak power, given other operational parameters such as average power, pulse duration, and repetition rate, is fundamental to select the best option for a particular application among the different commercial alternatives. In principle, it is quite simple to calculate the peak power, considering the actual temporal profile of the laser pulse. By assuming a train of continuously repeated, periodical, square pulses with repetition rate fR, pulse duration tP and average power PAV, the pulse energy EP and peak power PP calculations are trivial, with pulse energy provided by the ratio between average power and repetition rate and peak power provided by the ratio between energy and pulse duration:
The Advantages and Disadvantages of Passive vs Active Q-Switching:
Triggering – One of the significant disadvantages of passive q-switching is that you have no control over when the laser actually pulses. The laser’s pulse repetition rate will be solely dependent on the when the absorber saturates. This is very much akin to a free-running system which not only cannot be controlled but also can experience pulse to pulse variability or jitter. An actively q-switched laser, on the other hand, provides the ability to trigger the pulse at a specific time and with a particular pulse repetition rate. This makes it far easier when synchronizing the laser to other instrumentation, such as a kinematic arm for laser machining or a spectrometer for laser-induced breakdown spectroscopy (LIBS). It should be noted though that most passively q-switched lasers do contain an internal photodiode that can be used to synchronize to an external device, but this not nearly as flexible as the ability to trigger in.
Pulse Energy – While some passive q-switches are capable of producing rather large, mJ level, laser pulses, in general active q-switching tends to lead to far larger pulse energies. This is because the q-switch can be actively controlled to allow for the maximum shutter time needed for full population inversion. As a result, the q-switch can be timed to open with the same period as the decay lifetime of the gain medium’s metastable state resulting in the maximum possible pulse energy. By contrast with a passive q-switch once the absorber has saturated it will release all of the stored energy regardless of whether or not maximum population inversion has been achieved.
Why is a Low Jitter Feature Important in Actively Q-Switched DPSS Lasers?
In actively Q-switched lasers, the user controls the pulsed laser output, so that no laser pulse emission occurs without providing a proper input signal, aka “the trigger”. Due to the trigger signal propagation through the interface electronics, the Q-switch driver chain, and the laser resonator build-up time, a time delay (Td) is present between the externally-supplied trigger signal and the actual laser pulse emitted by the laser source. The Td can show fluctuations if any electronics or optics involved in the pulse generation process have a functional variance in time.
The parameter Td is very relevant in the timing management of some applications. You must consider both the time delay (Td) and a time jitter (Tj), which is a statistical variation of the time delay depending mostly on:
electrical noise in the trigger-chain
pulse-to-pulse fluctuation of trigger-chain electrical parameters
laser pulse build-up time-mechanism and associated fluctuations.
fluctuation of rising (-falling) edge temporal profile of the trigger signal
Because of the jitter phenomena, the actual value of the time delay is statistically altered. Therefore, the laser pulse emission event happens (in the vast majority of cases) inside a normal time distribution, defined by an average time delay Td and a standard deviation value Tj (i.e 68.2 out of 100 pulses develop in the time interval Td ±Tj).
What is a Thin Disk Laser, and What Advantages do They Offer?
A thin disk laser is a type of diode-pumped solid-state (DPSS) laser technology in which the gain medium is comprised of a thin disk of typically Yb:YAG crystal. The thickness of one of these disks (typically 150µm to 200µm thick) is substantially smaller than the beam diameter. This feature allows not only the ability to easily scale up power via pump beam diameter, but also provides a large surface area for heat dissipation. For example, the VaryDisk Series platform is a high energy, multi-milli-Joule laser system for laboratory investigations or industrial use. This is a thin disk regenerative amplifier for amplification of femtosecond, picosecond or nanosecond pulses with amplification factors in the order of 10⁶.
The picosecond laser benefits make them a good fit for many applications. Typically, various forms of micromachining and material processing come to mind, as mentioned above. The reduction of HAZ and elimination of post-processing makes these lasers desirable for processing of many materials, especially sensitive materials, including medical devices, where rough edges and pits can lead to collection and growth of bacteria, for example. Pico lasers also allow for very fine features to be machined without deformation of the surrounding material. The same is true for femtosecond lasers. However, the picosecond laser cost tends to be much more attractive, with high peak powers and higher average powers available at a lower price, and a less complicated system.
Some other applications that benefit from high peak power picosecond pulsed lasers include various medical applications, such as tattoo removal, pigment removal / pigment reduction, hair removal, and other ablation-based surgical procedures. Laser microscopy, optical parametric oscillators (OPO) pumping, time-of-flight (ToF) LIDAR, pump-probe measurements, and optical fiber communications all benefit from the used of picosecond pulsed lasers. Below we will detail some picosecond laser application examples and links to more in-depth articles:
Laser Material Processing:
Laser material processing includes a wide range of applications including laser scribing, laser drilling, laser cutting, laser marking, thin film removal, laser surface treatment, and much more. One thing most of these applications share is the benefit of utilizing very short light pulses in the picosecond and short nanosecond range (as well as femtosecond for certain applications), which provide high peak power for a particular pulse energy.
Typically, nanosecond pulses are too long, as there is a significant build up of heat in the surrounding material, causing a more prominent heat affected zone (HAZ), which can damage, warp, burn, or discolor the surrounding area. This increased HAZ is undesirable, as post processing (cleaning) is then required, and furthermore, depending on the requirements and specifications of the material or product, significant heat build up can cause catastrophic failure of the part, its particular features, or simply render it unusable, for example with medical products that need clean, smooth features.
Picosecond Ultrafast Lasers
Pico lasers that produce less than 10 picoseconds pulses belong to the category of ultrafast lasers or ultrashort pulse lasers. Ultrafast Lasers are ideal for the cold ablation of any material, including metals, ceramics, polymers, composites, coatings, glass, plastics, diamonds, and PET. Ultrafast lasers can even operate on layered substrates. Cold ablation allows for material to be removed without heating the residual matter. Thus, femtosecond fiber lasers will not produce heat affected zones (HAZ), splatter, or significant recast. Additionally, these ultrafast picosecond lasers will eliminate the need for any post-processing.
Picosecond vs Femtosecond Lasers:
In relation to femtosecond laser sources, picosecond lasers are typically more cost-effective, providing a higher average output power at a lower price point. Laser micromachining applications often benefit from that extremely high quality results provided by femtosecond pulses. However, short picosecond pulses often provide perfectly acceptably results when the processing parameters are optimal, making picosecond lasers the preferred choice, if you do not require the ultra-fine features and exceptional edge quality that femtosecond lasers provide.
LIDAR Becoming the Future of Bathymetry:
As in most LIDAR systems designed for distance measurement, bathymetric LIDAR relies on time-of-flight determination for calculating the distance to the target. This is done by using a time-gated detector which is synchronized with a pulsed (typically picosecond or short-nanosecond range) laser source so that the round-trip time (Δt) can be determined. In traditional LIDAR, the range (R) to the target is then determined using the following equation, R = C × Δt/2, where C is the speed of light. In bathymetry though there is an added complication because you want to determine the depth of the water, not the distance from the transceiver to the water. Therefore, you need to measure both the distance to the surface of the water and the floor and take the difference between the two. This is typically done using a “multi-beam” approach, which takes advantage of the difference in absorption of the water at various wavelengths. As can be seen in the graph below, water has an absorption minima around 500 nm, meaning that green laser light will penetrate much deeper into the water than near-infrared light will.
Want to Minimize Your LIDAR Footprint, Cost, and Energy Consumption?
Doppler LIDAR is growing in popularity, for instance, in wind farms, where the rapid detection of extreme weather changes can prevent damage to the wind turbine. Traditional anemometer/wind vane devices are too slow to report drastic weather changes in time to avoid damage. Alternatively, implementing a network of single-frequency Doppler LIDAR sensors around a wind farm, in conjunction with highly accurate wind models, allows for much higher accuracy wind speed readings and faster response times. This rapid access to accurate data provides time to adjust the blade angle to optimize the efficiency without overloading the turbine.
As we covered extensively in “Single-Frequency Fiber Lasers for Doppler LIDAR,” if you want to measure both the speed at which an object is moving and its location, there is no better option than frequency modulated (FM) LIDAR. For this signal processing methodology to work, you need to maintain precise control over the laser frequency. While a wide variety of single-frequency lasers have been used in Doppler LIDAR research, the industry as a whole has adopted picosecond and short-nanosecond pulsed, single-frequency fiber lasers as the ideal light source.
Microchip Lasers: Fully Integrated Modules for LIDAR & 3D Scanning
LIDAR lasers are available in a vast range of configurations, tailored for different sets of end-use applications. The main determining factor for which type of LIDAR laser you need depends on whether your application is measuring a moving or stationary target. If your target is stationary, and distance is the only necessary measurement, short-pulsed lasers, with pulse durations of a few nanoseconds (even <1ns) and high pulse energy are what you’re looking for. This is also accurate for 3D scanning applications (given a stationary, albeit a much closer target), but select applications can also benefit from frequency-modulated, single-frequency (narrow-linewidth) fiber lasers. If your target is moving, and speed is the critical measurement, you need a single-frequency laser to ensure accurate measurement of the Doppler shift.
While the primary difference between traditional LIDAR and 3D scanning applications is the distance from the laser to the target, both sets of applications benefit from the features provided by high-quality microchip lasers. Lightweight and very compact modules, with low power draw, are perfect for integrating into portable devices for long battery life and increased mobility in the field. Excellent beam quality enables very small spot sizes and therefore, high peak power, incident upon the sample, for high-quality data collection. A simplistic design and low cost ensure a long lifetime of reliable performance, with reduced susceptibility to shock and vibration, without breaking your budget.
Laser Induced Breakdown Spectroscopy (LIBS) in Biomedical Applications:
As the name implies LIBS utilizes a focused laser beam to breakdown or ablate the sample. In this process, a microscopic portion of the sample is vaporized causing a momentary plasma to be formed. This causes all of the ionized elements in the plasma plume to emit light corresponding to their unique atomic energy levels. By collecting the light emitted from the induced plasma plume and directing into a spectrometer the measured lines can then be correlated with the presence and concentrations of the samples elemental structure. While the physical process is quite different it is often helpful to think of LIBS, as an optical analog to mass spectrometry.
From this description above it should be obvious that the laser source used must have a sufficiently large energy density to ablate the sample in as short a time possible. As a result, the vast majority of LIBS lasers are q-switched diode pumped solid state (DPSS) lasers, which typically provide millijoules of energy in a nanosecond to picosecond pulse duration. When focused down to a small spot, this allows the laser to quickly ablate the sample, and trigger the spectrometer to immediately start the acquisition process to collect the atomic emissions from the short-lived plasma plume.
Raman Spectroscopy: Why are Picosecond Pulses Superior to Femtosecond?
Raman-based spectroscopy, on the other hand, is an entirely different nonlinear technique, relying on the frequency shift experienced by laser radiation incident on a molecule, related to its rotational and vibrational modes. Not being related to electronic transitions, the Raman shift is relative concerning the irradiating wavelength, and therefore, unless pursuing coherent excitation, laser source tunability is not required. Raman-based spectroscopy, being a nonlinear process, usually requires ultrashort pulse generation (e.g., practical TPA set-ups usually require < 300 fs pulse duration). On the other hand, since the Raman gain is generally higher than TPA cross-sections, cheaper and simpler picosecond lasers could be efficiently employed in incoherent Raman spectroscopy. Furthermore, in Raman spectroscopy, the spectral resolution is related to the laser source bandwidth. Therefore, the narrower bandwidths of picosecond lasers represent a remarkable advantage over their femtosecond counterparts.
With 1000s of fielded units, and over 25 years of experience, providing researchers with the best laser solution for their application, our expert team is ready to help! Working with RPMC ensures you are getting trusted advice from our knowledgeable and technical staff on a wide range of laser products. RPMC and our manufacturers are willing and able to provide custom solutions for your unique application.
If you have any questions, or if you would like some assistance please Contact Us here. Furthermore, you can email us at info@rpmclasers.comto talk to a knowledgeable Product Manager.
Alternatively, use the filters on this page to assist in narrowing down the selection of Picosecond lasers for sale. Finally, head to our Knowledge Center with our Lasers 101 page and Blogs, Whitepapers, and FAQ pages for further, in-depth reading.
Check out our Online Store: This page contains In-Stock products and an ever-changing assortment of various types of new lasers at marked-down/discount prices.
The FL-P series of pulsed fiber lasers is manufactured to Telcordia standards and is suitable for various applications with average powers up to 5W at 1um and 1.5um, peak powers up to 25kW, and pulse widths in the range of 400ps to 50ns. Available in both OEM and Turnkey formats, this series offers a variety of standard and custom configurations. Available options include pulse monitoring, int/ext triggering, TTL or LVDS input signals, extended operating temperature range, and a robust design.
The Jasper series is a diverse set of high-performance femtosecond fiber lasers providing different solutions based on a standard technology. The series includes the high-power Jasper X0 (200 µJ pulse energy / 60 W average power), the compact Jasper Micro (5 µJ pulse energy / 7 W average power) in a space-saving design, and the Jasper Flex for microprocessing (30 µJ pulse energy). Each model provides a fast warm-up time, long-term stability, and hands-free operation. Whether you need high power, compactness, or specific processing capabilities, the Jasper series has a solution.
The Lampo Series is a line of compact ultrafast lasers that deliver megawatt-level ps laser pulses at a selectable PRR from 50 kHz to 40 MHz. Available in IR (1064 nm), SHG (532 nm), and Deep-UV (266 nm) versions (355nm by request), the series offers pulse durations < 70 ps and average power up to 20W, 10W, and 1.5W respectively. With pulse energy up to 250uJ, 150uJ, and 30uJ, these lasers are ideal for a wide range of scientific, industrial, defense, medical, biological, and LIDAR applications. Built into a rugged, air-cooled single-unit laser head, these lasers are easy to operate and integrate, making them a valuable tool for sophisticated laser systems and lab applications.
The MicroMake Series is a fully-integrated, compact, sub-ns DPSS laser micromachining system for high precision and resolution applications. A flexible platform at 532 & 266 nm, with >40 kW of peak power and processing speeds up to 100mm/second, the system includes all the needed devices for direct laser micro-processing in a single, monolithic, air-cooled configuration. Equipped with a live microscope, alignments and in-process quality checks are a breeze. All these features perfectly suit various materials utilized in microelectronic circuits, displays fabrication and correction, biomedical device machining and optical substrates microprocessing.
The neoMOS ultrashort pulse laser series is a reliable, low-maintenance system designed for 24/7 industrial use. The ultra-compact laser head has the smallest footprint available and can be customized for a range of laser parameters, allowing easy integration and flexibility with various demanding processing applications, including glasses and plastics. It offers pulse widths from 700fs to 70ps, repetition rates from single-shot to 80MHz, up to 500µJ pulse energy, average output powers up to 100W, multi-megawatt peak powers, and perfect TEM00 beam quality @ 1064nm.
The neoAMP series includes the neoVAN and neoYb DPSS laser amplifiers, designed to boost the average power or pulse energy for various applications. The flexible system design ensures high scalability, and the ultra-compact modules are easy to integrate into existing processing or scientific systems. The neoVAN and neoYb amplifiers are highly reliable and offer proven long-term stability, enabling a range of applications that include high peak power, short pulse picosecond lasers for micromachining, or single-frequency radiation for gravitational wave detection.
The Nimbus Series is a line of highly compact, air-cooled (water-cooled option), short nanosecond (770 nm) and picosecond (1064 nm) pulsed DPSS lasers with high peak power & high energy pulses, designed for photoacoustic flow cytometry (PAFC), but also useful for LIDAR, material processing, and medical applications. NIR wavelengths provide increased tissue penetration, and particularly at 770 nm, the Nimbus is perfect for photodynamic therapy (PDT) and photobiomodulation (PBM) applications. Low pulse jitter reduces variations in trigger delay, and stable energy output ensures consistent results for measurement or processing.
The NPS series of ultrafast, picosecond pulsed, narrowband lasers combine the air-cooled compactness & ruggedness of fiber lasers with the spectral purity of the DPSS design, providing the ultimate solution for OEM integrators and researchers working with nonlinear optics applications like OPO pumping and narrowband Raman spectroscopy. These lasers are available at 355, 532, and 1064nm (tunable option from 750-1800nm), with up to 10W average output power, 7ps pulse width, and are passively q-switched up to 80MHz rep. rate. The transform-limited operation, with a narrow spectral width of <0.1nm, and accurate central wavelengths make these lasers a suitable candidate for highly efficient amplification. Optional add-ons and customization available.
The Q-SPARK series is an air-cooled, diode-pumped, Q-switched laser designed for researchers and application specialists working with ablation, LIDAR, remote sensing, and LIBS applications. The laser produces sub-nanosecond or nanosecond pulses with peak power up to 20 MW and pulse energies up to 20 mJ, making it ideal for a wide range of applications. With a short pulse (<800 ps to <2 ns), compact air-cooled package, and innovative water-free laser crystal end-pumping technology, the Q-SPARK series delivers high-quality, low divergence, Gaussian-like laser beams.
The Microchip series is a line of ultra-compact, single longitudinal mode (SLM), narrow linewidth, passive q-switch, ns/ps pulsed DPSS lasers. Offering exceptional performance and versatility in a compact form factor, every model is 1:1 interchangeable, regardless of wavelength. The lasers feature pulse widths from 400 ps to 2 ns, pulse energy up to 80 µJ, and repetition rates up to 100 kHz. Available in wavelengths from the UV to the NIR, this series is designed for LIDAR, 3D scanning, LIBS, night vision, and more.
The SL-Pico series of picosecond supercontinuum lasers is designed to meet the diverse and dynamic needs of cutting-edge research and industrial applications. These supercontinuum white lasers are highly regarded for their wide wavelength range and cost-effectiveness. The SL-Pico offers a spectral range from 410 to 2400 nm, has high power, is very stable, and is capable of delivering power up to 8 W. The SLM versions are mode-locked fiber lasers with a fixed rep. rate, and the SLMV versions have a tunable repetition rate (up to 40 or 200 MHz), ensuring compatibility with a wide range of devices and various applications like fluorescence microscopy, TCSP, hyperspectral imaging, semiconductor inspection, and much more!
The TLS series is the broadest continuously optically tunable broadband picosecond laser combining a supercontinuum laser & tunable bandpass filter. Users can tune output power, wavelengths from 410-1700nm by choosing the VIS, IR, SWIR, or a custom configuration, and real-time bandwidth control for TLS-Red (10 or 20nm fixed for TLS-Blue). These picosecond tunable lasers are suitable for various fields that require precision scanning and high output from fluorescence microscopy to time-resolved spectroscopy, such as TCSPC, Hyperspectral imaging, Machine vision, Semiconductors, Sensors, and other applications.
The VaryDisk Series is a versatile family of thin-disk laser systems that provide high pulse energies at high average powers and are suitable for lab or industrial use. These thin-disk regenerative amplifiers offer a range of output specifications to fit various application needs. The base configurations provide 25 W average power with 2.5 mJ pulse energy @ 343 nm (THG), 50 W and 5 mJ @ 515 nm (SHG), and 100W and 100 mJ @ 1030 nm.
The Vento series is a compact and ruggedized sub-nanosecond MOPA laser series, providing fully tailored solutions, whether operating in a clean, scientific laboratory or in harsh industrial machining or airborne LIDAR application environments, requiring a low SWaP configuration. With pulse durations down to 500 ps and repetition rates up to 200 kHz, this laser series produces a high average power of up to 50 W @ 532 nm and up to 100 W @ 1064 nm. Choose from many options including beam expanding & collimating options, low jitter options, air- or water-cooling, an industrial or up to IP68 protected package, and more options, depending on your requirements.
The Wedge series of DPSS lasers is a rugged industrial solution, designed for seamless integration into OEM micromachining, LIDAR, and LIBS end-user systems. Based on proprietary fast Q-switching technology, this series is compact, sealed, and monolithic, making them insensitive to vibrations & harsh environments. High peak powers, relatively low energy, and low heat generation allow efficient ablation and non-linear interaction. Available from 266 nm to ≈ 3 µm, up to 4 mJ pulse energy @ 1064, and up to 4 MW peak power, the lightweight, air-cooled package benefits LIDAR and aerospace applications, while short pulses provide exact time-of-flight measurements. Many optional add-ons and customization options.
SHIPS TODAY 
Pico lasers that produce less than 10 picoseconds pulses belong to the category of ultrafast lasers or ultrashort pulse lasers. 
The FL-P series of pulsed fiber lasers is manufactured to Telcordia standards and is suitable for various applications with average powers up to 5W at 1um and 1.5um, peak powers up to 25kW, and pulse widths in the range of 400ps to 50ns. Available in both OEM and Turnkey formats, this series offers a variety of standard and custom configurations. Available options include pulse monitoring, int/ext triggering, TTL or LVDS input signals, extended operating temperature range, and a robust design.
The Jasper series is a diverse set of high-performance femtosecond fiber lasers providing different solutions based on a standard technology. The series includes the high-power Jasper X0 (200 µJ pulse energy / 60 W average power), the compact Jasper Micro (5 µJ pulse energy / 7 W average power) in a space-saving design, and the Jasper Flex for microprocessing (30 µJ pulse energy). Each model provides a fast warm-up time, long-term stability, and hands-free operation. Whether you need high power, compactness, or specific processing capabilities, the Jasper series has a solution.
The Lampo Series is a line of compact ultrafast lasers that deliver megawatt-level ps laser pulses at a selectable PRR from 50 kHz to 40 MHz. Available in IR (1064 nm), SHG (532 nm), and Deep-UV (266 nm) versions (355nm by request), the series offers pulse durations < 70 ps and average power up to 20W, 10W, and 1.5W respectively. With pulse energy up to 250uJ, 150uJ, and 30uJ, these lasers are ideal for a wide range of scientific, industrial, defense, medical, biological, and LIDAR applications. Built into a rugged, air-cooled single-unit laser head, these lasers are easy to operate and integrate, making them a valuable tool for sophisticated laser systems and lab applications.
The MicroMake Series is a fully-integrated, compact, sub-ns DPSS laser micromachining system for high precision and resolution applications. A flexible platform at 532 & 266 nm, with >40 kW of peak power and processing speeds up to 100mm/second, the system includes all the needed devices for direct laser micro-processing in a single, monolithic, air-cooled configuration. Equipped with a live microscope, alignments and in-process quality checks are a breeze. All these features perfectly suit various materials utilized in microelectronic circuits, displays fabrication and correction, biomedical device machining and optical substrates microprocessing.
The neoMOS ultrashort pulse laser series is a reliable, low-maintenance system designed for 24/7 industrial use. The ultra-compact laser head has the smallest footprint available and can be customized for a range of laser parameters, allowing easy integration and flexibility with various demanding processing applications, including glasses and plastics. It offers pulse widths from 700fs to 70ps, repetition rates from single-shot to 80MHz, up to 500µJ pulse energy, average output powers up to 100W, multi-megawatt peak powers, and perfect TEM00 beam quality @ 1064nm.
The neoAMP series includes the neoVAN and neoYb DPSS laser amplifiers, designed to boost the average power or pulse energy for various applications. The flexible system design ensures high scalability, and the ultra-compact modules are easy to integrate into existing processing or scientific systems. The neoVAN and neoYb amplifiers are highly reliable and offer proven long-term stability, enabling a range of applications that include high peak power, short pulse picosecond lasers for micromachining, or single-frequency radiation for gravitational wave detection.
The SL-Pico series of picosecond supercontinuum lasers is designed to meet the diverse and dynamic needs of cutting-edge research and industrial applications. These supercontinuum white lasers are highly regarded for their wide wavelength range and cost-effectiveness. The SL-Pico offers a spectral range from 410 to 2400 nm, has high power, is very stable, and is capable of delivering power up to 8 W. The SLM versions are mode-locked fiber lasers with a fixed rep. rate, and the SLMV versions have a tunable repetition rate (up to 40 or 200 MHz), ensuring compatibility with a wide range of devices and various applications like fluorescence microscopy, TCSP, hyperspectral imaging, semiconductor inspection, and much more!
The TLS series is the broadest continuously optically tunable broadband picosecond laser combining a supercontinuum laser & tunable bandpass filter. Users can tune output power, wavelengths from 410-1700nm by choosing the VIS, IR, SWIR, or a custom configuration, and real-time bandwidth control for TLS-Red (10 or 20nm fixed for TLS-Blue). These picosecond tunable lasers are suitable for various fields that require precision scanning and high output from fluorescence microscopy to time-resolved spectroscopy, such as TCSPC, Hyperspectral imaging, Machine vision, Semiconductors, Sensors, and other applications.
The VaryDisk Series is a versatile family of thin-disk laser systems that provide high pulse energies at high average powers and are suitable for lab or industrial use. These thin-disk regenerative amplifiers offer a range of output specifications to fit various application needs. The base configurations provide 25 W average power with 2.5 mJ pulse energy @ 343 nm (THG), 50 W and 5 mJ @ 515 nm (SHG), and 100W and 100 mJ @ 1030 nm.
